There are many...............
ADDRQ - (SPO0) Add a temporary job dependency or user requirement
ADDSCH - (SPO0) Delay scheduled start and end times by up to
24 hours
AL - (UTL0) Assign a record
ALC - (UTL0) Allocate and catalog a record
ALLOC - (UTL0) Dynamically allocates a volume under MVS
APA - (MLR0) Statistical graph menu
AR - (AR00) Automated Recovery Facility (ARF)
ARFP - (SPO0) Delete ARF elements for a job in the queues
ARTS - (UTL0) Inquiry and update on CA-11 CMT and JEHF
BLDG - (UTL0) Create a generation data group index
CALMOD - (SDM0) Online calendar maintenance
CANCEL - (SPO0) Remove jobs and scheduled workstations from the CA 7
tails
CAT - (UTL0) Catalogs a record
CONN - (UTL0) Connect high-level catalog indexes
CTLG - (SPO0) Maintenance Facility for the CA 7 Catalog
DB - (SDM0) Database Maintenance
DCONN - (UTL0) Disconnect catalog indexes
DEALLOC - (UTL0) Release of volumes previously allocated by ALLOC
DEMAND - (SPO0) Force immediate scheduling of a CA 7 controlled job
DEMANDH - (SPO0) Force immediate scheduling of a CA 7 controlled job
and place it in a hold state
DIRECT - (SPO0) Change the MAIN ID of jobs in the request or done
tails
DLTX - (UTL0) Delete inactive indexes in the system catalog
DMDNW - (SPO0) Force immediate scheduling controlled by CA 7
networks
DMPCAT - (UTL0) Dump the first catalog block for a specified DSN
DMPDSCB - (UTL0) Returns the Format-1 DSCB for a specified DSN
DMPDSN - (UTL0) Output specified record records
DUMP - (SLI0) Hexadecimal dump of CA 7 database entries
CASE - (SFC0) Forecasts all jobs and workstations
FIND - (UTL0) Searches DASD volumes for a specific record
FJOB - (SFC0) Prediction of jobs(Video) CA 7 Command Reference - LQ Command | CA7 LQ Command formats | CA 7 command tutorial | CA7 Queues.FLOWD - (SPO0) Clear active CPM flow items
FLOWL - (SLI0) Displays information about active CPM flows
FPOST - (SFC0) Prognoseausgabe-Workstations
FPRE - (SFC0) Prognoseeingabe-Workstations
FQALL - (SFC0) Forecast jobs and workstations, including what's inside
the queues
FQJOB - (SFC0) Forecast jobs including what is in the queues
FQPOST - (SFC0) forecast output workstations, including what's inside
the post-processing queue
FQPRE - (SFC0) Forecast input workspaces, including what's inside
the preprocessing queue
FQRES - (SFC0) forecast resources for jobs and workstations,
including what's in the queues
FQSTN - (SFC0) Forecast jobs, including what's in queues
FQTAPE - (SFC0) Create tape pull list for jobs including what's inside
the queues
FRES - (SFC0) Forecasts resources for jobs and workstations
FRJOB - (SFC0) Reverse jobflow structure for jobs (database only)See AlsoDEMAND, DEMAND commandFRQJOB - (SFC0) Reverse jobflow structure for jobs (database+queues)
FSTN - (SFC0) forecast work centers
FSTRUC - (SFC0) Show trigger structure of jobs
FTAPE - (SFC0) Creates a tape pull list for jobs
FWLP - (SFC0) Generate workload planning data
GRAPHD - (MLR0) Graph Database Data
GRAPHJ - (MLR0) chart order data
GRAPHN - (MLR0) Graphic network data
GRAPHS - (MLR0) Chart system data
HELP - (SLI0) Formatted tutorial request screen
HOLD - (SPO0) Hold job movement currently in the CA 7 queues
IN - (SPO0) Records the start of workstation activity
IO - (SPO0) Record the start and end of workstation activity
JCLOVRD - (SPO0) Set up or fulfill a JCL override request
LACT - (SLI0) List jobs in the active queue
LACTR - (SLI0) List resource information for jobs in the active queue
LARF - List (SLI0) ARFSET definition informationLARFQ - (SLI0) List active ARF queue information
LCTLG - List (SLI0) catalog entries from the CA 7 database
LDSN - (SLI0) List record entries from the CA 7 database
LDTM - (SLI0) List Analysis of RQMT Satisfaction Lead Times
LGVAR - (SLI0) List Global Variables
LIST - (SJR0) List jobs that require a reboot
LISTDIR - (UTL0) Lists a PDS directory
LJCK - (SLI0) List JCL for job (& check if JCLCHECK is installed)
LJCL - (SLI0) List JCL entries for specific jobs
LJES - (SLI0) List jobs in ACT and/or PRN queues that show JES #
LJOB - (SLI0) List job information
LJOBR - (SLI0) List job resource information
LLIB - (SLI0) List Librarian or Panvalet Members (read-only)
LLOCK - (SLI0) Lists elements of the database in a locked state
LNODE - (SLI0) Lists entries in the XPJOB node table in memory
LNTWK - (SLI0) List network information
LOAD - (SPO0) Initiates database loading of a job
LOADH - (SPO0) Initiates loading of the database of a job on hold(Video) How to Fill In The CA 7, 7a, 7bLOC - (SLI0) List catalog contents for specified records
LOGIN - (SPO0) Records the start of workstation activity
LOGOUT - (SPO0) Records completion of workstation activity
LPDS - (SLI0) Lists members of a PDS or sequential data set
LPOST - (SLI0) Lists entries from the post-processing queue
LPRE - (SLI0) List entries from the preprocessing queue
LPROS - (SLI0) List a prose member
LPRRN - (SLI0) Lists entries from the prequeue
LQ - (SLI0) Lists entries from the CA 7 queues
LQP - (SLI0) List priority information from REQ and RDY queues
LQR - (SLI0) List resource information from REQ, RDY and ACT queues
LRDY - (SLI0) List entries from the ready queue
LRDYP - (SLI0) List priority information from the ready queue
LRDYR - (SLI0) List resource information from the ready queue
LREQ - (SLI0) List entries from the request queue
LREQP - (SLI0) List priority information from the request queue
LREQR - (SLI0) List resource information from the request queue
LRES - (SLI0) Lists resources required by a specific jobLRLOG - (SLI0) List run log information
LRMD - (SLI0) List reminder entries from the preprocessing queue
LSCHD - (SLI0) List schedule information
LSYS - (SLI0) List job information and record xref for a job or system
LWLB - List (SLI0) resource information
MAP - (UTL0) list attributes of DASD records
NOPRMP - (SPO0) Suspend prompt
NXTCYC - (SPO0) Skip, start, or stop normal scheduled processing
Cycles
OUT - (SPO0) Records completion of workstation activity
POST - (SPO0) Meet job requirements
PRINT - (SRC0) Print base calendar
PRMP - (SPO0) Restores the temporarily suspended command prompt
PRRNDEL - (SAN0) Lists and/or deletes jobs in the pre-execution queue
PRRNJCL - (SAN0) List jobs in prerun queue that have preserved JCL,
and optionally delete this JCL
PRSCF - (SPO0) Release a pending resource
PRSQA - (SPO0) Activate a required resourcePRSQD - (SPO0) Disables a required resource
PS - (PS00) Displays the CA 7/Personal Planning field
QJCL - (SDM0) JCL queued for a job currently in the queues
QM - (SQM0) menu of queue management functions
RELEASE - (SPO0) Allow normal scheduling flow for suspended work
REMINDER - (SPO0) Sends reminder messages to workstations
RENAME - (UTL0) Renames DASD records
REQUEUE - (SPO0) Moves a job back to the request queue
RESANL - (SAN0) Scan tape drives for create/update value jobs
Used by workload balancing routines
RESCHNG - (SPO0) Free tape drives that are no longer needed
RESOLV - (SRC0) Select schedule members for schedule resolution
RESTART - (SJR0) Restart a job with or without CA-11 control
RM - (RSC0) Management of Virtual Resources
RQMT - (SAN0) Check dependencies of predecessor jobs to be created/updated
Forward reference node (pred)
RQVER - (SAN0) Check and update unsatisfied internal job/DSN
Requests in the request queue(Video) ca7 imp questionsRSVP - (SPO0) Confirmation Prompts for Late or Interrupted Work
RUN - (SPO0) Schedule a job to run without prompting
Review or Closing Processing
RUNH - (SPO0) Schedule a job to run in HOLD state without input
Requirements review or final processing
RUNNW - (SPO0) Forces scheduling of a CA 7 workstation without
final processing
RUSH - (SPO0) Mark work as critical
SCHDMOD - (SDM0) Fixed schedule changes
SCRATCH - (UTL0) Scratch DASD records
SPACE - (UTL0) Displays information about DASD volumes
SSCAN - (SPO0) Enable schedule scan or change parameters
START - (SPO0) Reactivate interrupted queue activity
STOP - (SPO0) Suspend normal queue activity
SUBMIT - (SPO0) Forces submission of input request and JCL
Presentation
SUBSCH - (SPO0) Speed up the schedule start and due times by up to
24 hours
SUBTM - (SPO0) Modifies a job submission time requirement
TIQ - (UTL0) Request for CA-1 TMC (Tape Management Catalog)
TIQU - (UTL0) Update for CA-1 TMC (Tape Management Catalog)
TRIG – (SAN0) Check and update all trigger related nodes (JDEP,
AUTO and TRGD)
UNC - (UTL0) Remove records from catalog
UT - (UTL0) Utilities Menu
VERIFY - (SPO0) Set up or fulfill a job verification request
XNODE - (SDM0) Update persistent node definitions
XPJOB - (SDM0) Check or update XPJOB job definitions
XPOST - (SQM0) LOGIN/LOGOUT screen for output workstations
XPRE - (SQM0) LOGIN/LOGOUT screen for input workstations
XPSWD - (SDM0) node/owner password mappings
XQ - (SQM0) Update selection screen for jobs in native order
XQJ - (SQM0) Update selection screen for jobs in name order
XQM - (SQM0) Update selection screen for jobs (with RQMT summary)
XQN - (SQM0) Updated job selection screen in CA7# sequenceXREF - (SAN0) Check record and/or network entries for incomplete
Using job cross references
XRQ - (SQM0) Screen for posting request queue requests
XRST - (SQM0) Job restart screen
XSPOST - (SQM0) Short LOGIN/LOGOUT screen for output workstations
XSPRE - (SQM0) Short LOGIN/LOGOUT screen for input workstations
XUPD - (SQM0) Job Type Queue Records Update Screen
XWLB - (SQM0) Make temporary changes to the WLB selection parameters*** SYSTEM COMMANDS ***
(Video) Mainframe Wednesday Talks# 17 Scheduling Tool CA7 Overview #kumaritchannel #mainframe #jcl/ASSIGN - (SCM0) Change CPU identification, job barrier limits, or
logical pin assignment
/AUTO - (SCM0) Recycle a command at a specified interval
/BRO - (SCM0) Send a queued message to all CA 7 terminals
/CHANGE - (SCM0) Changes the security definition of an operator
/CLOSE - (SCM0) Close a terminal, line, or group of lines for processing
/COPY - (SCM0) Copy a display page from one terminal to another
/DISPLAY - (SCM0) Check terminal network and internal system status
/DRCLASS - (SCM0) Add or remove active disaster recovery classes
/DRMODE - (SCM0) Change options for disaster recovery mode
/EADMIN - (SCM0) Maintain global email options
/ECHO - (SCM0) Preformat a command line for a 3270 type terminal
/EMAIL - (SCM0) Request that an email be sent
/FETCH - (SCM0) Fetches a VTAM terminal command
/GVAR - (SCM0) Add/update/delete global JCL variable definitions
/JCL - (SCM0) Add/update/delete a JCL symbolic library definition/LOG - (SCM0) Writes a freeform message to the log record
/LOGOFF - (SCM0) Ends a terminal session
/LOGON - (SCM0) Start a terminal session
/MSG - (SCM0) Sends a free-form message to another terminal
/MVS - (SCM0) Issue an MVS operator command
/NXTMSG - (SCM0) Displays the next message queued on your terminal
/OPEN - (SCM0) Open a terminal, line, or group of lines for processing
/OPERID(S)-(SCM0) Display information about the defined OPERIDs
/PA - (SCM0) Assigns a string to a PA key on a 3270 type
Device
/PAGE - (SCM0) Move forward or backward to examine multiple pages
/PF - (SCM0) Assigns a string to a PF key on a 3270 type
Device
/PROF(S) - (SCM0) View/update CA 7 user profile(s)
/PURGPG - (SCM0) Purge all pages of output messages
/REFRESH - (SCM0) Refresh UID RESOURCE/MSMR table
/RELINK - (SCM0) Dynamically replaces a program with a newer version
/RESET - (SCM0) Resets the CA 7 job number counter to 1/SDESK - (SCM0) Create a Unicenter Service Desk request
/SHUTDOWN - (SCM0) Causes CA 7 to shut down normally
/START - (SCM0) Start lines and terminals
/STOP - (SCM0) Stop lines and terminals
/SWAP - (SCM0) Causes the log files to be switched immediately
/UID - (SCM0) Updates the current UID security level or lists the UID
resource table
/WLB - (SCM0) Change Workload Balancing processing
/WTO - (SCM0) Output messages to the operating system console
/XTASK - (SCM0) Send commands to cross-platform ROUTER or TRACKER(Video) California's New Best Friend - The CA7™
****************************************************** ********************
You have to find out for yourself which ones you need.
All the best
Greetings
Kalyan